da ta sheet part number 856512 168.5 mhz saw filter subject to change or obsolescence without notice rev d 12/08 ? triquint semiconductor page 1 of 6 features for wcdma applications usable 1 db bandwidth of 20 mhz low loss single-ended operation at 50 w single-ended input \ balanced output at 200 w ceramic surface mount package (smp) hermetic rohs compliant (2002/95/ec), pb -free package pin configuration surface mount 5.00 x 5.00 x 1.32 mm bottom view smp-20a 4 8 7 6 5 3 2 1 se - balanced configuration pin no. description 7 input + 3 output + 2 output - 1,6,5 ground 4,8 case ground single - ended configuration pin no. description 1.32 nom. 1.52 max. 0.66 1.27 1.27 0.64 2.08 5.00 5.00 3 input 7 output 1,2,5,6 ground 4,8 case ground dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width +0.15/-0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0m, over a 2 C 6m ni plating pb
da ta sheet part number 856512 168.5 mhz saw filter subject to change or obsolescence without notice rev d 12/08 ? triquint semiconductor page 2 of 6 electrical specifications (1) operating temperature range: (2) -20 to +80 c parameter (3) minimum typical (4) maximum unit center frequency - 168.5 - mhz minimum insertion loss 158.5 C 178.5 mhz - 8.0 9.0 db 1.0 db bandwidth 22 26.4 - mhz amplitude variation 158.5 C 178.5 mhz - 0.6 1.0 db group delay ripple 158.5 C 178.5 mhz 160.5 C 176.5 mhz - - 20 20 40 40 nsec nsec relative attenuation (5) 10 C 100 mhz 100 C 149 mhz 149 C 150.5 mhz 150.5 C 153.5 mhz 183.5 C 186.5 mhz 186.5 C 190 mhz 190 C 250 mhz 250 C 310 mhz 310 C 410 mhz 410 C 1000 mhz 50 33 20 3 2 19 33 40 50 55 61 41 32 6.5 4.5 32 42 56 59 59 - - - - - - - - - - db db db db db db db db db db input/output return loss 158.5 C 178.5 mhz 10 14 - db evm 158.5 C 163.5 mhz 163.5 C 168.5 mhz 168.5 C 173.5 mhz 173.5 C 178.5 mhz - - - - 1.2 1.2 1.2 1.3 2.5 2.6 2.5 2.5 % % % % source impedance (single-ended) (6) load impedance (single-ended) (6) load impedance (balanced) (6) - - - 50 50 200 - - - notes : 1. all specifications are based on the triquint tes t circuit matching schematics shown on page 5 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. relative to minimum insertion loss 6. this is the optimum impedance in order to achiev e the performance shown
da ta sheet part number 856512 168.5 mhz saw filter subject to change or obsolescence without notice rev d 12/08 ? triquint semiconductor page 3 of 6 electrical specifications (1) operating temperature range: (2) -40 to +85 c parameter (3) minimum typical (4) maximum unit center frequency - 168.5 - mhz minimum insertion loss 158.5 C 178.5 mhz - 8.0 9.0 db 1.0 db bandwidth 22 26.4 - mhz amplitude variation 158.5 C 178.5 mhz - 0.6 1.0 db group delay ripple 158.5 C 178.5 mhz 160.5 C 176.5 mhz - - 20 20 50 40 nsec nsec relative attenuation (5) 10 C 100 mhz 100 C 149 mhz 149 C 150.5 mhz 150.5 C 153.5 mhz 183.5 C 186.5 mhz 186.5 C 190 mhz 190 C 250 mhz 250 C 310 mhz 310 C 410 mhz 410 C 1000 mhz 50 33 19 2.5 1.8 16 33 40 50 55 61 41 32 6.5 4.5 32 42 56 59 59 - - - - - - - - - - db db db db db db db db db db input/output return loss 158.5 C 178.5 mhz 10 14 - db evm 158.5 C 163.5 mhz 163.5 C 168.5 mhz 168.5 C 173.5 mhz 173.5 C 178.5 mhz - - - - 1.2 1.2 1.2 1.3 3.5 3.5 3 3 % % % % source impedance (single-ended) (6) load impedance (single-ended) (6) load impedance (balanced) (6) - - - 50 50 200 - - - notes : 1. all specifications are based on the triquint tes t circuit matching schematics shown on page 5 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. relative to minimum insertion loss 6. this is the optimum impedance in order to achiev e the performance shown
da ta sheet part number 856512 168.5 mhz saw filter subject to change or obsolescence without notice rev d 12/08 ? triquint semiconductor page 4 of 6 typical performance (at room temperature)
da ta sheet part number 856512 168.5 mhz saw filter subject to change or obsolescence without notice rev d 12/08 ? triquint semiconductor page 5 of 6 matching schematics actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input 1,2,4 5,6,8 50 w ww w 22pf 91nh 3 7 18nh 50 w ww w 27nh 50 w single-ended output 50 w single-ended input 1,4 5,6,8 50 w ww w 27nh 7 2 200 w ww w 82nh 82nh 3 9pf 36nh 200 w balanced output marking pcb footprint date code aw jjjym id dot logo sawtek code marking 1.47 5.20 2.28 .84 1.47 .84 .43 .71 the date code consists of: jjj = julian day, y = last digit of year, m = manufacturing site code this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel 12.0 section a-a a a 0.3 1.8 5.25 5.25 ?1.5 ?1.5 8.0 4.0 2.0 5.5 1.75 logo triquint pad 1 id dot direction of travel 2.0 ?13.0 ?20.2 12.8 ?330 2.7 ?102 dimensions shown are nominal in millimeters packaging quantity: 4000 units/reel
da ta sheet part number 856512 168.5 mhz saw filter subject to change or obsolescence without notice rev d 12/08 ? triquint semiconductor page 6 of 6 maximum ratings parameter symbol minimum maximum unit operating temperature range t -40 +85 o c storage temperature range t stg -40 +85 o c important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102, pb-free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
